Clio supplemento a Argonauta n. 7-12 2011
back to index
TRANSLATION
Model of the Mediterranean.
1) After fixed with pins on each sheet, the scraps of paper, we started cutting the termotraforo. Particular attention should be in making the cuts tilted toward the deepest parts of the sea with the aim of simulating the seabed slopes, but also to offer a superior edge support for parts of the lower ones, as shown in the drawing.
2) Seabed inserted under the continental shelf.
3) Taking into account the cost of polystyrene and of the quantity required for the model, we first did some test cuts on scrap foam, to be sure of the quality of the result.
1) After fixed with pins on each sheet, the scraps of paper, we started cutting the termotraforo. Particular attention should be in making the cuts tilted toward the deepest parts of the sea with the aim of simulating the seabed slopes, but also to offer a superior edge support for parts of the lower ones, as shown in the drawing.
2) Seabed inserted under the continental shelf.
3) Taking into account the cost of polystyrene and of the quantity required for the model, we first did some test cuts on scrap foam, to be sure of the quality of the result.
 |
 |
|